Pre applied HDPE fully bonded waterproof membrane(sand finish)
Description
Membrane consists of multi-layer composite waterproofing material for superior waterproofing performance, including a layer of thick HDPE film, self-adhesive polymer layer and a unique particulate layer.
It can be installed on uniform and regular concrete blinding, compacted sand-stone cushion for waterproofing of below ground surfaces and is also used for waterproofing of confined surfaces or blind side waterproofing. Product is designed to bond fully and permanently with poured concrete against it after placing and lying reinforcement.
Features
1. Forms permanent bond to concrete poured against it, preventing water from seeping into the gap between waterproofing membrane and the structure
2. Not affected by the displacement of the basal layer/ ground settlement beneath slabs
3. Membrane is self-protecting. It can be trafficked immediately after application and does not require the use of protective layer
4. Simple and quick to install, requiring no priming or fillets
5. Unaffected by wet conditions
6. Fully-adhered watertight laps and detailing
7. Excellent bonding even under long-term water immersion
8.Membrane can be applied at -4ºC and above
Sand layer makes it possible to construct and work on membrane after applied without protective layer
Application
1. Waterproofing below ground concrete structures
2. Protection of concrete foundations against aggressive ground contaminants
3.Prevents methane leakage in underground layers
4. Post-applied(without sand) waterproofing system for walls and tunnels projects.
Technical Data
|
No.
|
Test Item
|
Test Method
|
Result
|
Conclusion
|
|
1
|
Peel Strength
|
ASTM D903-98(2017)
|
0.201kgf/mm
|
Pass
|
|
2
|
Puncture Resistance
|
ASTM E154/E154M-08a(2013)
Section 10
|
995N
|
Pass
|
|
3
|
Tear Strength
|
ASTM D624-00(2012)
|
Transverse
|
77.1kN/m
|
Pass
|
|
Lengthways
|
77.6kN/m
|
|
4
|
Tensile Strength
|
ASTM D882-12
|
Transverse
|
24.5Mpa
|
Pass
|
|
Lengthways
|
24.7Mpa
|
|
Elongation at break
|
Transverse
|
940%
|
Pass
|
|
Lengthways
|
930%
|
|
5
|
Tensile Strength
|
ASTM D412-16
Method A
|
Transverse
|
25.6Mpa
|
Pass
|
|
Lengthways
|
26.2Mpa
|
|
Elongation at break
|
Transverse
|
860%
|
|
Lengthways
|
800%
|
|
6
|
T-Peel Strength
|
With reference to ASTM D1876-08(2015) and client's requirement
|
0.541 N/mm
|
Pass
|
|
7
|
Water Absorption
|
ASTM D570-98(2010)
|
0.29%
|
Pass
|
|
8
|
Low Temperature Flexibility
|
ASTM D1790/D1790M-15 Section 7.6
|
No affection
|
Pass
|
Specification
|
Product name
|
Width
|
Length
|
Membrane thickness
|
HDPE sheet thickness
|
|
Pre-applied HDPE waterproof membrane with sand
|
1m/2m
|
20m
|
1.2mm
|
0.8mm
|
|
1.5mm
|
1.0mm
|
